Texas Bones Overdrive
Radial engineering Texas Bones Overdrive
Donner Mon Avis |
Radial engineering Texas Bones Overdrive
autres modeles Radial engineering1. IN: 1/4" input jack for your guitar.
2. OUT: 1/4” output jack connection to your amp.
3. PSU: Connection for 9-12 volt DC (center pin negative ).
4. BYPASS: Footswitch toggles between overdrive and clean bypass. An
on/off LED status indicator illuminates when the overdrive is active.
5. TOGGLE: Choose between the two overdrive channels by depressing
the footswitch. Channel-1 is voiced for rhythm guitar while channel-2 is
augmented in the mid-range to increase sustain and cut for solos. An LED
status indicator illuminates when channel-2 is active.
6. DRIVE: Used to adjust overall amount of overdrive.
7. TONE 1 & 2: Both channels are equipped with a tone control that lets you
adjust each channel to your specifi c'est needs.
8. BITE 1 & 2: Both channels are equipped with a 3-position BITE switch that
allows you to assign each channel a different voicing. Choose between
a vintage style overdrive (OFF), an extra beefy sound (MID) or a more
aggressive modern (MAX) tonal structure.
9. LEVEL 1 & 2: Both channels are equipped with a level control that lets
you adjust the overall output volume of each channel separately. Think of
these like the master volume control on a guitar amplifi er.
Les avis sur Radial engineering Texas Bones Overdrive
Désolé aucun internaute n'a encore donné son avis sur Radial engineering Texas Bones Overdrive .Soyez le premier en cliquant ici